FiveStar WPN2817W Manuel d'installation

Naviguer en ligne ou télécharger Manuel d'installation pour Cuisiniers FiveStar WPN2817W. FiveStar WPN2817W Installation Instructions Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 12
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
INSTALLATION INSTRUCTIONS
PROFESSIONAL RANGE MODELS
30” ALL GAS, CONVECTION WITH SEALED BURNERS**
30” NATURAL GAS MODELS
*TN281-7BW
*TN281-7W
**THESE MODELS ARE NOT FIELD CONVERITBLE FOR LP/PROPANE GAS. THEY MUST BE
ORDERED FROM THE FACTORY SET FOR NATURAL OR LP/PROPANE.**
30” LP/PROPANE GAS MODELS
*PN281-7BW
*PN281-7W
**THESE MODELS ARE NOT FIELD CONVERTIBLE FOR NATURAL GAS. THEY MUST BE
ORDERED FROM THE FACTORY SET FOR NATURAL OR LP/PROPANE.**
IF YOU HAVE QUESTIONS, CALL 800-251-7224, 8 AM TO 5 PM EASTERN TIME, OR VISIT OUR
WEBSITE, WWW.FIVESTARRANGE.COM.
Vue de la page 0
1 2 3 4 5 6 ... 11 12

Résumé du contenu

Page 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS PROFESSIONAL RANGE MODELS 30” ALL GAS, CONVECTION WITH SEALED BURNERS** 30” NATURAL GAS MODELS *TN281-7BW *TN281-7W **

Page 3 - Inspection and Unpacking

STEP 12 OVEN OPERATION GAS OVEN • Turn oven thermostat knob counter clockwise to 350°. • The oven burner should light within 60 seconds. STEP 13

Page 4 - REMOVE PACKAGING

STEP 14 CHECKLIST FOR SEALED BURNER INSTALLATION  MAKE SURE ALL CONTROLS ARE IN THE “OFF” POSITION.  Gas supply is “on”  Electric power is

Page 5 - 120 volts, 60 Hz, 15 amps

Installation Instructions BEFORE YOU BEGIN CAUTION: Read these instructions completely and carefully. THESE RANGES S

Page 6

INSTALLATION INSTRUCTIONS Please read these instructions before attempting to install this range Inspection and Unpacking Check the range carton

Page 7

STEP 1 REMOVE PACKAGING Before moving the range indoors:  Remove outer carton and packing material from the shipping base. The range is now r

Page 8 - DIAGRAM FOR STEP 7

STEP 5 ELECTRIC CONNECTION This range must be supplied with 120 volt, 60 Hz. and connected to an individual, properly grounded branch circuit protec

Page 10

STEP 7 INSTALLING THE BACKGUARD – SEALED BURNER MODELS NOTE: PLEASE READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION. 7-1 Remove the burner grates

Page 11 - STEP 13

DIAGRAM FOR STEP 7 STEP 8 LEVEL THE RANGE 1. Remove shipping tape from the leveling legs. 2. Carefully slide the range into position. Be ca

Commentaires sur ces manuels

Pas de commentaire